PEEK
The PEEK function returns the value that is contained at a certain memory address offset. QB64 currently has limited access!
Syntax
- variable = PEEK(segment_offset)
- Reads the specified memory segment_offset value.
- Use DEF SEG before PEEK to specify which memory segment to work in.
- PEEK only reads the memory byte value. Not certain bits. (See AND)
- Important SCREEN segments using PEEK and POKE include &HB800 (text segment) and &HA000 (graphics segment).
- To return to Basic default segment use DEF SEG without any arguments.
- Warning: DEF SEG, VARSEG , VARPTR, PEEK or POKE access QB64's emulated 16 bit conventional memory block!
- It is highly recommended that QB64's _MEM memory system be used to avoid running out of memory.
Example: Checking the 8 keyboard bit settings using a PEEK return value.
SCREEN 12 DEF SEG = 0 ' BIOS area oldvalue = PEEK(1047) ' IMPORTANT! save initial setting to reset later DO: _LIMIT 100 port = PEEK(1047) IF port > 0 THEN LOCATE 26, 19: COLOR 11: PRINT "Turn ALL Locks off to see each key's bit value!" END IF COLOR 14:LOCATE 2, 25 PRINT "PEEK(1047) ="; port; "present keyboard port byte value" LOCATE 5, 35 IF (port AND 1) = 1 THEN COLOR 10: PRINT "R SHIFT PRESSED " ELSE COLOR 12: PRINT "R SHIFT RELEASED" LOCATE 7, 35 IF (port AND 2) = 2 THEN COLOR 10: PRINT "L SHIFT PRESSED " ELSE COLOR 12: PRINT "L SHIFT RELEASED" LOCATE 9, 35 IF (port AND 4) = 4 THEN COLOR 10: PRINT "CTRL KEY PRESSED " ELSE COLOR 12: PRINT "CTRL KEY RELEASED" LOCATE 11, 35 IF (port AND 8) = 8 THEN COLOR 10: PRINT "ALT KEY PRESSED " ELSE COLOR 12: PRINT "ALT KEY RELEASED" LOCATE 13, 35 IF (port AND 16) = 16 THEN COLOR 10: PRINT "SCROLL LOCK ON " ELSE COLOR 12: PRINT "SCROLL LOCK OFF" LOCATE 15, 35 IF (port AND 32) = 32 THEN COLOR 10: PRINT "NUMBER LOCK ON " ELSE COLOR 12: PRINT "NUMBER LOCK OFF" LOCATE 17, 35 IF (port AND 64) = 64 THEN COLOR 10: PRINT "CAPS LOCK ON " ELSE COLOR 12: PRINT "CAPS LOCK OFF" LOCATE 19, 35 IF (port AND 128) = 128 THEN COLOR 10: PRINT "INSERT MODE ON " ELSE COLOR 12: PRINT "INSERT MODE OFF" COLOR 11: LOCATE 21, 20: PRINT "Press mode keys to change or [ESC] to quit!"; LOOP UNTIL INP(&H60) = 1 ' escape key exit POKE 1047, oldvalue ' IMPORTANT reset to original settings DEF SEG
- NOTE: Keyboard Port function key settings cannot be reset on NT machines!
See Example: SelectScreen (Screen 0 row highlighting)
See also:
- POKE (write to memory), INP (read register)
- DEF SEG, VARSEG, VARPTR
- _MEMGET (function), _MEMPUT
- DEF SEG = 0, Scancodes (demo)
- PEEK and POKE Library
- Screen Memory
